~JS · Change Backfeed Sequence

Sets when the label is pulled back after being fed to the tear-off edge (backfeed).

Parameters

• ~JSb - b: A = 100% backfeed after printing, B = 0% after printing and 100% before the next label, N = normal (90% after printing, default), O = backfeed off, 10–90 = percentage of backfeed after printing

Example

~JSN

Tip

Applies in tear-off, peel-off and cutter mode: the label is fed to the edge after printing and pulled back before the next print - ~JS sets how this is split.