ZPL to ESC/POS
Paste ZPL and get an ESC/POS job for Epson TM, Star, Bixolon and other receipt printers. The label is sent as GS v 0 raster bands at 180 or 203 dpi and cut afterwards - for packing slips and labels on 80 mm paper.
Automate this tool via the API: POST /v1/tools/zpl-to-escpos
API docs
Send it to the printer
The file is a finished job: send it unchanged to TCP port 9100 of the printer - no driver needed. Replace the IP address with your printer's.
Linux / macOS
nc -q 1 192.168.1.50 9100 < label.escpos
Windows PowerShell
$c = [Net.Sockets.TcpClient]::new('192.168.1.50', 9100)
$b = [IO.File]::ReadAllBytes("$PWD\label.escpos")
$c.GetStream().Write($b, 0, $b.Length); $c.Close()
With the zplCloud CLI the job goes out byte-exact over TCP or USB, through a watch folder or through the agent to a printer in another network - the CLI can also convert ZPL itself with --language.
zplCloud CLI
zplcloud send --target 192.168.1.50 --file label.escpos zplcloud send --usb --file label.escpos zplcloud send --remote-printer 4 --file label.zpl --language escpos
Preview appears here after conversion